Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
TheDon Date registered: Dec 1899 Location: Vehicle(s): | wiring head unit im not doing the 2 chan - 4 chan conversion today since i dont have the wires but i want to put the cd player in today, its a sony CDX-GT10W i have the plug for the cd player and the wires off it here are what the wires go to White-speaker left posative White/black stripe left negative -------these two connect to what in the chasis Gray right speaker posative Gray/black stripe negative-----these two connect to what in the chasis Green left rear posative Green/black stripe left rear negative-----these two connecto to what in the chasis Purple right rear posative Pureple/black striple right rear negative---these two connect to what in the chasis Solid black(appears to be the ground.. where should i fasten this to) Blue- this is for the antena then a red and yellow that arent labled | ||
#19163 | |||
Author |
| ||
Nutz Expert Date registered: Apr 2006 Location: Vehicle(s): Posts: 2026 | RE: wiring head unit TheDon - 6/4/2006 9:51 AM im not doing the 2 chan - 4 chan conversion today since i dont have the wires but i want to put the cd player in today, its a sony CDX-GT10W i have the plug for the cd player and the wires off it here are what the wires go to White-speaker left posative White/black stripe left negative -------these two connect to what in the chasis Gray right speaker posative Gray/black stripe negative-----these two connect to what in the chasis Green left rear posative Green/black stripe left rear negative-----these two connecto to what in the chasis Purple right rear posative Pureple/black striple right rear negative---these two connect to what in the chasis Solid black(appears to be the ground.. where should i fasten this to) Blue- this is for the antena then a red and yellow that arent labled Red = battery constant Yellow = memory/ignition switch ^^^^ Or vice-versa,either way no damage will occur if backwards.You will know if they are backwards if you have to reset the settings on your stereo everytime you get in. Black = ground to metal Blue with white stripe = remote (for amp or whatever) If you are dropping this in your W123,ditch the stock speaker wiring and run new 12-14 gauge bypassing the fader switch. | ||
#19235 - in reply to #19163 | |||
Author |
| ||
ttaleric Date registered: Dec 1899 Location: Vehicle(s): | RE: wiring head unit Black = ground to metal
non-painted metal | ||
#19396 - in reply to #19163 | |||
« View previous thread :: View next thread » |
|
|