Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
G-AMG G-Class DIY Host Date registered: May 2006 Location: South Texas Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350 | Photo DIY- V-Belt Tensioning Pully Replacement Another Less Than Interesting Post, but Since I was Doing the Work Anyway...... My V-Belt Tensioner was DRIVING ME NUTS!! My "E" Einspritzung (Fuel Injected) was Sounding More Like a DIESEL, Rattling Up a Storm! I Went Through AutoHausAZ to get a replacement (I Should have paid a little more and gone thru Caliber), but found the part had a funky T50 TAMPER PROOF fastener on it to rotate the device. Bad Idea. Anyway, if you are getting the "rattles" then it is an easy change!! The usual CYA blah, blah stuff. I am not claiming any expertise. My projects are based on my interpretation of the WIS procedures. Do work at your own discretion (1.JPG) (2.JPG) (3.JPG) (4.JPG) (5.JPG) (6.JPG) (7.JPG) (8.JPG) (9.JPG) (10.JPG) (11.JPG) (12.JPG) Attachments ---------------- 1.JPG (148KB - 44 downloads) 2.JPG (184KB - 26 downloads) 3.JPG (209KB - 22 downloads) 4.JPG (227KB - 24 downloads) 5.JPG (194KB - 19 downloads) 6.JPG (178KB - 24 downloads) 7.JPG (132KB - 20 downloads) 8.JPG (143KB - 17 downloads) 9.JPG (159KB - 17 downloads) 10.JPG (150KB - 17 downloads) 11.JPG (162KB - 23 downloads) 12.JPG (84KB - 28 downloads) | ||
#75094 | |||
Author |
| ||
storm Date registered: Dec 1899 Location: Vehicle(s): | Re: Photo DIY- V-Belt Tensioning Pully Replacement another great DIY completed,.. going into the DIY & FAQ section ASAP keep up the great work buddy | ||
#75338 - in reply to #75094 | |||
Author |
| ||
G-AMG G-Class DIY Host Date registered: May 2006 Location: South Texas Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350 | RE: Photo DIY- V-Belt Tensioning Pully Replacement Folks, Please forgive me, but I been advised the CORRECTED method of Turning the "Updated" version of the Belt Tensioning device is as follows: http://www.pointedthree.com/disc/forums/showthread.php?tid=7517&pos... | ||
#76221 - in reply to #75094 | |||
Author |
| ||
sst Date registered: Dec 1899 Location: Vehicle(s): | RE: Photo DIY- V-Belt Tensioning Pully Replacement G-AMG - 5/20/2007 11:53 PM Another Less Than Interesting Post, but Since I was Doing the Work Anyway...... My V-Belt Tensioner was DRIVING ME NUTS!! My "E" Einspritzung (Fuel Injected) was Sounding More Like a DIESEL, Rattling Up a Storm! I Went Through AutoHausAZ to get a replacement (I Should have paid a little more and gone thru Caliber), but found the part had a funky T50 TAMPER PROOF fastener on it to rotate the device. Bad Idea. Anyway, if you are getting the "rattles" then it is an easy change!! wow amazing set of tools, may i ask where do u get these hand tools from dealer? The usual CYA blah, blah stuff. I am not claiming any expertise. My projects are based on my interpretation of the WIS procedures. Do work at your own discretion | ||
#90618 - in reply to #75094 | |||
« View previous thread :: View next thread » |
|
|