| FAQ | Member List | Albums | Today's Posts | Search  |
| Welcome Guest. ( logon | register ) | |||||
| ||||||
|
| Topic Tools | Message Format |
| ||
| Otiswesty Administrator Date registered: Jun 2007 Location: Portland, Oregon Vehicle(s): 463.241, 461.213 Posts: 3013  | ||
| ||
| ||
| paulunm Veteran Date registered: Jan 2015 Location: Los Angeles Vehicle(s): 2000 G500 Posts: 124  | ||
| ||
| ||
| imjustdave Regular Date registered: Feb 2012 Location: Bonney Lake Washington USA Vehicle(s): 2004 G500, 2014 Audi Q7 TDI, 2006 Ram 3500. Posts: 77  | Re: Air Intake Manifold vacuum hose paulunm - 12/14/2020 7:11 AM Check out post #15 here- https://mbworld.org/forums/w210-amg/462977-intake-manifold-hose.html Yeah I have been looking around for sure, been finding a bunch of articles and posts from other who have experienced the same thing. I'm speculating that Mercedes actually expected this hose to be replaced after the initial wore out by cutting it off and using a 4mm line, Part #56 in the drawings, why they didn't' do that from the get go with just a female part at the bottom of the intake for everyone and or typical male out on a 90 I'm not sure. But the link you have is doing just that except they are using a 4mm connector to make the connection, VS the hard line called out in the drawing. I have some parts on order so with luck this wont be a issue. I will report back  | |
| ||
| ||
| J.R. Elite Veteran Date registered: Apr 2006 Location: Southern Maryland Vehicle(s): 00 G500, 09 911 4S, 11 Cayenne S, 86 280GE (sold) Posts: 828  | ||
| ||
|
