![]() | Welcome Guest. ( logon | register ) | |||||
|
|
|
| Topic Tools ![]() | Message Format ![]() |
Author |
| ||
03-Gwagen Elite Veteran Date registered: Apr 2006 Location: Western Pennsylvania Vehicle(s): CLK63 Black Series, 2018 G63, 2016 GLE300d Posts: 888 ![]() | lubing throttle valve ball socket WIS says that you pry off the plastic ball socket and fill with grease. What does pry off mean? Take a screwdriver twist and lever the socket off? Is there a risk of breaking the plastic? Can I just squirt a little trans fluid into the socket without removing it or spray some wurth lubricant into it? Edited by 03-Gwagen 7/10/2006 5:04 PM | ||
#30232 |
| ||
Author |
| ||
Braingears Expert Date registered: Apr 2006 Location: St Petersburg, FL Vehicle(s): G320 & ML320 Posts: 1450 ![]() | Re: lubing throttle valve ball socket They pop right off. Do not worry, you will not break anything. It's like the snap button on your jeans. | ||
#30253 - in reply to #30232 |
| ||
Author |
| ||
03-Gwagen Elite Veteran Date registered: Apr 2006 Location: Western Pennsylvania Vehicle(s): CLK63 Black Series, 2018 G63, 2016 GLE300d Posts: 888 ![]() | Re: lubing throttle valve ball socket Chuck - thank you. | ||
#30283 - in reply to #30232 |
| ||
« View previous thread :: View next thread » |
|
|