Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
VCR Date registered: Dec 1899 Location: Vehicle(s): | 711.117 Gear box Dos same one knows if a 711.117 Gear box from an OM603 fits in a W460 equipped whit a OM617.952? 1st gear 4,695 2nd gear 2,401 3rd gear 1,436 4th gear 1 5th gear 0,806 Thanks VCR | ||
#30119 | |||
Author |
| ||
frank_be Veteran Date registered: Apr 2006 Location: Belgium Vehicle(s): G350 Turbo Posts: 148 | RE: 711.117 Gear box It will fit if you change the bell housing. Greetings, Frank | ||
#30122 - in reply to #30119 | |||
Author |
| ||
tinol2000 Date registered: Dec 1899 Location: Vehicle(s): | RE: 711.117 Gear box I don't think so. If I remember well that gear is a one piece housing. | ||
#30987 - in reply to #30122 | |||
Author |
| ||
EuroTruck Extreme Veteran Date registered: Apr 2006 Location: Oakwood, Georgia - USA Vehicle(s): 2012 Audi A4 Avant S-Line, 2015 Ridley NOAH SL Posts: 518 | RE: 711.117 Gear box Quite a few people have converted their trucks to the MB 5-speed gearbox. Since the 711.117 is also longer, you'll have to shorten the intermediate shaft between the gearbox and the transfer case. I recall that a few changes must be made to the shift linkage as well, but I don't remember the specifics.
-Sean | ||
#31005 - in reply to #30119 | |||
Author |
| ||
VCR Date registered: Dec 1899 Location: Vehicle(s): | Re: 711.117 Gear box Thanks for the information. | ||
#31049 - in reply to #30119 | |||
« View previous thread :: View next thread » |
|
|