Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
G-Man Date registered: Dec 1899 Location: Vehicle(s): | SWB and LWB driveshaft part interchangeability? I'm looking to replace or rebuild the driveshafts and joints on my 460 300GD. Are there any bits from the SWB shafts I could use? Also are the 460 and 463 driveshafts identical? Thanks. | ||
#32434 | |||
Author |
| ||
dai Expert Date registered: Apr 2006 Location: Oregon USA Vehicle(s): 300GD 300TD BMW R100RS Landini 80F Posts: 2110 | Re: SWB and LWB driveshaft part interchangeability? The front shafts might interchange between LWB and SWB 460s, rears will not. Look up the parts on the EPC or the Cool Russian site and see what numbers are the same. Most of the U-Joints are staked in and not easily rebuildable. Some have had success doing this. Once the sliding splines are worn too much the shaft needs replacement. The short shaft between the tranny and T-case will work if the transmissions are the same. They are different between 4 and 5 speeds. -Dai | ||
#32457 - in reply to #32434 | |||
Author |
| ||
G-Man Date registered: Dec 1899 Location: Vehicle(s): | Re: SWB and LWB driveshaft part interchangeability? Interesting. Thanks. Have you URLs for the sites you mention? | ||
#32532 - in reply to #32434 | |||
Author |
| ||
w.james Veteran Date registered: Jun 2006 Location: New Jersey Vehicle(s): 84 280 GE 617A 5sp getrag Posts: 239 | RE: SWB and LWB driveshaft part interchangeability? http://www.detali.ru/cat/oem_mb0.asp?TP=2 | ||
#32737 - in reply to #32434 | |||
Author |
| ||
G-Man Date registered: Dec 1899 Location: Vehicle(s): | RE: SWB and LWB driveshaft part interchangeability? Prikrasna! Spasiba. | ||
#32761 - in reply to #32434 | |||
Author |
| ||
T.Schuhe Elite Veteran Date registered: Apr 2006 Location: Olympia, Washington State, USA Vehicle(s): 460 1985 LWB 300GD five speed Posts: 711 | RE: SWB and LWB driveshaft part interchangeability? Your diesel will have the large compensator between the t/c and the rear shaft. This, I believe, make the diesel rear shaft different from the benzine fuel version. | ||
#33197 - in reply to #32761 | |||
Author |
| ||
G-Man Date registered: Dec 1899 Location: Vehicle(s): | Re: SWB and LWB driveshaft part interchangeability? thanks, Mr. Schuhe. | ||
#33859 - in reply to #32434 | |||
« View previous thread :: View next thread » |
|
|