|
Ze Bocaina
Date registered: Dec 1899
Location:
Vehicle(s):
| A little Help.
I have a problem.I dont know what is original, and what is not in this G. Its a G300 92 .
I dd not find pics of this model in the internet, or in the old forum.
If one of you have pic..please post it or mail me..
saludos |
|
| |
|
fernweh
Date registered: Apr 2006
Location: Calabasas, CA - Centenario, BCS - Luebeck, Germany
Vehicle(s): Few Mercedes-Benz, a Toyota Amphibious and a Vespa
| RE: A little Help.
You might want to post the VIN# to look it up in the EPC or WIS.
Ii is for sure a great looking, very clean truck - so, what is missing in you new baby?
Karl |
|
| |
|
DUTCH
Administrator Doppelgänger
Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9963
| RE: A little Help.
Ze Bocaina - 5/4/2006 7:23 PM
Nothing , only curiosity...
thanks
If you wanted to post the VIN, someone could print and send you a copy of the original Vehicle Data Card. That woukld tell you everything that was on the truck when it left the factory. |
|
| |
|
fernweh
Date registered: Apr 2006
Location: Calabasas, CA - Centenario, BCS - Luebeck, Germany
Vehicle(s): Few Mercedes-Benz, a Toyota Amphibious and a Vespa
| RE: A little Help.
DUTCH - 5/4/2006 4:25 PM
Ze Bocaina - 5/4/2006 7:23 PM
Nothing , only curiosity...
thanks
If you wanted to post the VIN, someone could print and send you a copy of the original Vehicle Data Card. That woukld tell you everything that was on the truck when it left the factory.
Dutch,
where do you print the VDC from? I have got the WIS working pretty nicely but do not know my way around for sure. Every time I find something new, but do I find it again....?
Karl |
|
| |
|
DUTCH
Administrator Doppelgänger
Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9963
| RE: A little Help.
fernweh - 5/4/2006 7:31 PM
DUTCH - 5/4/2006 4:25 PM
Ze Bocaina - 5/4/2006 7:23 PM
Nothing , only curiosity...
thanks
If you wanted to post the VIN, someone could print and send you a copy of the original Vehicle Data Card. That woukld tell you everything that was on the truck when it left the factory.
Dutch,
where do you print the VDC from? I have got the WIS working pretty nicely but do not know my way around for sure. Every time I find something new, but do I find it again....?
Karl
I don't have a WIS, but use the EPC. In the ?Informastion? tab at the top, there should be a Data Card tab in the drop down. (You have to do this after you've brought up the window for your specific VIN. When the Data Card is up, there's a print button on the lower right of the window,.
Hope that helps. |
|
| |
|
DUTCH
Administrator Doppelgänger
Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9963
| VDC Sent
 |
|
| |
