PointedThree - Photo DI"M"- Spark Plug Change M112 W210

Welcome Guest. ( logon | register )

FAQ

Member List

Albums

Today's Posts

PointedThree : Sedan Forums : W210 E Class : Photo DI"M"- Spark Plug Change M112 W210

Page 1 of 1

Photo DI"M"- Spark Plug Change M112 W210

Topic Tools

Message Format

Author

Posted 5/5/2012 11:58 PM

G-AMG
G-Class DIY Host

Date registered: May 2006
Location: South Texas
Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350
1000

Photo DI"M"- Spark Plug Change M112 W210

I'm not sure what happened to my Previous Post on Spark Plug Change... I think it was one of my "Original" Post, and I could have somehow not Linked things properly... but over the years I've gotten numerous request for the Whole Procedure. As Luck would have it, my HD crashed and I lost all of my photos.

Anyway, I am at the TIME component of the 4 Year/60,000 Mile Change Interval, so I thought I would Re-Post.

One HUGE difference is the use of the Specified MB Tool 112 589 01 09 00 (Hazet 4766). It is 3/8" Drive VERY thin-walled, and with the U-Joint feature, it adds those few degrees of Flexibility needed for the Job. You will also need a 3" Extension (Hazet 8821-3 is what WIS Recommends). Last time I used a 1/2" Drive set-up and it was a pain.

Also, this time I did not remove the Air-Intake tubing from the MAS to the Engine. It was not necessary.

Again, this is "My" interpretation of the WIS, and is intended as "entertainment value only". If you are going to do the job, please refer to an approved manual.