Welcome Guest. ( logon | register )   
FAQ Member List Albums Today's Posts Search

PointedThree :  Sedan Forums : W210 E Class : Error keeps coming back

Page 1 of 1 1
Error keeps coming back
Topic Tools Message Format
Author
Posted 11/9/2011 8:57 AM
Alvarsson
Member


Date registered: Jan 2008
Location: Finland
Vehicle(s): Benz E230
Posts: 5

Error keeps coming back

My 722.6 tranny keeps returning error 126 . (Communication with traction system disturbed/ cohen factor from DME not plausible). I have not noticed any major symtoms in shifting or handling part from the "cold takeoff jerk" i wrote about in an erlier thread . A whining sound is olso present for the first 30min . I assume this can be due to a blocked ATF filter .Anyone experiensed this ?
#196644
Top of the page Bottom of the page
Author
Posted 11/9/2011 2:16 PM
louwdj
Veteran


Date registered: Feb 2007
Location: Johannesburg South Africa
Vehicle(s): 89 W460 230GE 5 door; 82 W123 230e; 99 W210 E240
Posts: 139
100
Re: Error keeps coming back

Nope, I have not experienced similar. Sorry I cannot help.

However, I had a problem with delayed upshift at high speed i.e. with overtaking the car would rev up and not upshift. Diagnostics at agents showned nothing untoward. Took it to a non-franchised Merc W/shop. Car had blocked catilisators. Car had done low mileage, mostly short trips with first owner (<55,000 kms in 9 years). Once Cats were cleared the Air Mass Meter was also replaced.
#196649 - in reply to #196644
Top of the page Bottom of the page
« View previous thread :: View next thread »
Page 1 of 1 1
Forum Jump :
All times are EST.  The time is now 7:34:55 PM.

Execution: 0.140 seconds, 92 cached, 14 executed.