Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
atg Veteran Date registered: Nov 2014 Location: Los Angeles Vehicle(s): 2005 G55, 1985 300tdt Posts: 129 | om617.952 WIS for timing chain tensioner rail removal Is it possible to remove the tensioner rail with the head on the motor, or will it not come out through the head open8ng? Also, do I need to remove the main crank pulley to get the retaining bolt out? I am not talking about the one on the other side with the slide rail pin. The one I am talking about is curved and pushes against the chain to tension the chain. Thanks. Edited by atg 5/31/2015 12:14 PM | ||
#228404 | |||
Author |
| ||
ForcedInduction Regular Date registered: Sep 2006 Location: Federal Heights, CO Vehicle(s): 1980 240D 3.0VNT Posts: 89 | RE: om617.952 WIS for timing chain tensioner rail removal The banana rail can be removed with the head on. The crank pulley and idler sprocket (in the head) must be removed to extract the retaining pin. | ||
#231778 - in reply to #228404 | |||
« View previous thread :: View next thread » |
|
|