Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
G1979 Veteran Date registered: Apr 2006 Location: Indialantic, Fl Vehicle(s): G500 2005 Posts: 185 | HHT ? I'm looking in to retrofit my G500 with a webasto, and I found how to do it on the WIS, but there is one step that I have no clue, It saids that the aux. heater needs to be release by the HHT. what is the HHT?. Is this something that I can do? Thank you JV | ||
#10260 | |||
Author |
| ||
fourbyfourclub Extreme Veteran Date registered: Apr 2006 Location: New Jersey, USA Vehicle(s): 300G Posts: 302 | RE: HHT ? 1.HHT in WIS - HAND HELD TESTER. means you have to use portable volts/amps tester for your Wwbasto installation. | ||
#10264 - in reply to #10260 | |||
Author |
| ||
G1979 Veteran Date registered: Apr 2006 Location: Indialantic, Fl Vehicle(s): G500 2005 Posts: 185 | RE: HHT ? that dose not make sense to me, if is a volts/amps tester,and they ask me to release or unlock the aux. heater with it, how do I do that? sorry I just do not know? JV | ||
#10308 - in reply to #10264 | |||
Author |
| ||
AlanMcR Expert Date registered: Apr 2006 Location: US, CA, Los Altos Vehicle(s): G300DT E300DT 230SL Posts: 3500 | RE: HHT ? The HHT is a computerised device that the MB dealers use. Some of the independents have these too. My local independent has a tool, made by Baum, that has been able to access/reset SRS and ABS codes. I doubt that the Baum tool can tunnel through the vehicle network to the Webasto, but you never know until you try. | ||
#10529 - in reply to #10260 | |||
« View previous thread :: View next thread » |
|
|