Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
roughneck Expert Date registered: Apr 2006 Location: UK, Germany & USA Vehicle(s): 270 cdi.300 GD 300 GE.lwb 300 GE.swb. Disco 2 Posts: 4398 | Competition Corner. This was found in the centre tray of the BRIXMIS 280 GE, it has been with the vehicle since circa 1988 and is a special tool made of by workshops and carried by most if not all tour drivers on Gs, If you can identify it's use you will win a day out spannering at "Camp ferocious" or a case of my special screenwash " as recomended by Mark". twodogs is excluded. Edited by roughneck 5/17/2006 4:42 PM (MVC-011S.JPG) Attachments ---------------- MVC-011S.JPG (28KB - 12 downloads) | ||
#13493 | |||
Author |
| ||
cball Member Date registered: Apr 2006 Location: Vancouver, B.C. Vehicle(s): '86 280GE Posts: 44 | RE: Competition Corner. Is it for undoing the plastic drain plug under the bell-housing? Chris. | ||
#13500 - in reply to #13493 | |||
Author |
| ||
G350DT Date registered: Dec 1899 Location: Vehicle(s): | Re: Competition Corner. Is it to remove the drain plug on the transfer case ? It is what I used | ||
#13538 - in reply to #13493 | |||
Author |
| ||
TWODOGS Extreme Veteran Date registered: Apr 2006 Location: UK Vehicle(s): Norwegian Army 240GD Posts: 584 | Re: Competition Corner. Thats not a tool its a standard Landrover chassis bolt !!!! Twodogs Edited by TWODOGS 5/18/2006 3:00 AM | ||
#13668 - in reply to #13493 | |||
Author |
| ||
79percent Extreme Veteran Date registered: Apr 2006 Location: Remscheid / Germany Vehicle(s): 300 GE Posts: 537 | RE: Competition Corner. I go for Siemens Lufthaken or as you would say GEAH - General Electric Air Hook.
| ||
#13751 - in reply to #13493 | |||
Author |
| ||
roughneck Expert Date registered: Apr 2006 Location: UK, Germany & USA Vehicle(s): 270 cdi.300 GD 300 GE.lwb 300 GE.swb. Disco 2 Posts: 4398 | RE: Competition Corner. Is that the same thing as a sky hook??? OK no winners. it is to undo the fuel tank drain to get rid of poor quality DDR fuel if by some misfortune the vehicle got filled at an ARAL or other gas station. | ||
#14056 - in reply to #13493 | |||
Author |
| ||
T.Schuhe Elite Veteran Date registered: Apr 2006 Location: Olympia, Washington State, USA Vehicle(s): 460 1985 LWB 300GD five speed Posts: 711 | RE: Competition Corner. roughneck, What is the size of the bolt head? Thanks. | ||
#14067 - in reply to #14056 | |||
Author |
| ||
Johann Veteran Date registered: May 2006 Location: Centurion, South Africa Vehicle(s): 1999 LWB 290GDT 1981 SWB 240GD+ Cabrio 2015 G63 Posts: 259 | RE: Competition Corner. Allan key to check diff oil? | ||
#14094 - in reply to #13493 | |||
Author |
| ||
G wizz Elite Veteran Date registered: Apr 2006 Location: Uk Vehicle(s): Dont own a G anymore, Too expensive!!!! Posts: 686 | Re: Competition Corner. sure its not a tool to find a G-SPOT | ||
#14188 - in reply to #13493 | |||
Author |
| ||
Gareth Coe Date registered: Dec 1899 Location: Vehicle(s): | Re: Competition Corner. TWODOGS - 5/18/2006 8:00 AM Thats not a tool its a standard Landrover chassis bolt !!!! Twodogs
He he, but that CAN'T be right: it's not rusty enough | ||
#14194 - in reply to #13668 | |||
Author |
| ||
roughneck Expert Date registered: Apr 2006 Location: UK, Germany & USA Vehicle(s): 270 cdi.300 GD 300 GE.lwb 300 GE.swb. Disco 2 Posts: 4398 | RE: Competition Corner. Here is the proof, it's not rusty because it's good German quality. (MVC-012S.JPG) Attachments ---------------- MVC-012S.JPG (64KB - 9 downloads) | ||
#14735 - in reply to #13493 | |||
Author |
| ||
Greeney Date registered: Dec 1899 Location: Vehicle(s): | Re: Competition Corner. I thought it was a flux capacitor!! | ||
#14751 - in reply to #13493 | |||
« View previous thread :: View next thread » |
|
|