Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
Brad75 Member Date registered: Dec 2018 Location: Philadelphia Vehicle(s): Sprinter/G550 Posts: 19 | Brush Guard Hardware? i sent my 2015 brush guard off to be powder coated and the guy misplaced a few pieces of hardware. the specific parts im looking for are the quick connect piece that requires a special tool to remove. i need the part with the male threaded end that threads into the steel upright portion of the brush guard. in the diagram below its part# 005015 im going to call the dealership tomorrow but i figured id try here first. thanks for your time, ]free pic hosting no sign up im looking for the counterpart to this piece here ] Edited by Brad75 1/17/2020 8:38 PM | ||
#241427 | |||
Author |
| ||
Brad75 Member Date registered: Dec 2018 Location: Philadelphia Vehicle(s): Sprinter/G550 Posts: 19 | RE: Brush Guard Hardware? heres a better picture of the part i need. i circled it in red. ive already called a few dealerships and theyre still trying to figure out what exactly im talking about ] | ||
#241428 - in reply to #241427 | |||
Author |
| ||
Brad75 Member Date registered: Dec 2018 Location: Philadelphia Vehicle(s): Sprinter/G550 Posts: 19 | RE: Brush Guard Hardware? i found it! but for the price of a pair of them i could spend another $150 or so and get an entire brush guard off of Ebay. https://www.g-wagenaccessories.com/products/quick-release-receiver-a... ] ] | ||
#241436 - in reply to #241427 | |||
Author |
| ||
Roverrange Member Date registered: Nov 2019 Location: North Florida Vehicle(s): 2005 G500 Posts: 19 | Re: Brush Guard Hardware? Not much help here but I just had my brush guard powder coated also. I didn’t send those pieces because I figured the coating would just wear off. I cleaned off any rust after disassembling them, then oiled and reassembled. Good as new. Here is a tip also, don’t lay the brush guard down on cardboard when reassembling it. Set it on something soft like a blanket. I got a bunch of micro scratches from dust and dirt in the fresh powder coat. Hopefully they buff out. | ||
#241442 - in reply to #241427 | |||
Author |
| ||
Brad75 Member Date registered: Dec 2018 Location: Philadelphia Vehicle(s): Sprinter/G550 Posts: 19 | RE: Brush Guard Hardware? thanks for the tip! i sent those parts over by accident. at first i was only planning on having the chrome bars powder coated so i thread the pieces back onto the uprights. i brought everything with me and decided then to powder coat the entire bumper, uprights and all. thats when i forgot to take them off. my dumb fault... | ||
#241454 - in reply to #241427 | |||
Author |
| ||
Roverrange Member Date registered: Nov 2019 Location: North Florida Vehicle(s): 2005 G500 Posts: 19 | Re: Brush Guard Hardware? Were you able to find a replacement? I feel like a lot of these expensive small parts lend themselves to 3D stainless printing. Even the brush guard removal tool. It may be worth it to make some models of them now. | ||
#241456 - in reply to #241427 | |||
Author |
| ||
Brad75 Member Date registered: Dec 2018 Location: Philadelphia Vehicle(s): Sprinter/G550 Posts: 19 | RE: Brush Guard Hardware? only parts i found so far are the ones from gwagonaccessories for $126 each | ||
#241458 - in reply to #241427 | |||
Author |
| ||
Roverrange Member Date registered: Nov 2019 Location: North Florida Vehicle(s): 2005 G500 Posts: 19 | Re: Brush Guard Hardware? Do you have the part number? | ||
#241459 - in reply to #241427 | |||
Author |
| ||
Brad75 Member Date registered: Dec 2018 Location: Philadelphia Vehicle(s): Sprinter/G550 Posts: 19 | RE: Brush Guard Hardware? the only info i have is from here. https://www.g-wagenaccessories.com/products/quick-release-receiver-a... | ||
#241460 - in reply to #241427 | |||
Author |
| ||
GTYAS New user Date registered: Feb 2020 Location: Los Angeles Vehicle(s): 300GD Posts: 1 | RE: Brush Guard Hardware? PMed you. I might be able to help. Brad75 - 1/24/2020 11:09 AM the only info i have is from here. https://www.g-wagenaccessories.com/products/quick-release-receiver-a... Edited by GTYAS 2/26/2020 12:03 PM | ||
#241535 - in reply to #241460 | |||
« View previous thread :: View next thread » |
|
|