|
Fred V
Regular
Date registered: Apr 2014
Location: Green Mnts
Vehicle(s): 02 G500
Posts: 88
| "Please wait", no start?
Now with a 2010 G550 which has an odd quirk. Key in ignition, turn as normal, dash lights come on, but no starter, nothing, message on the dash display between tach and speedometer says "Please wait"
Turn key back and forth more times, nothing.
Remove key and re-insert, starts normally. Same with two different keys.
Odd or ominous?
Thank you. |
|
| |
|
Otiswesty
Administrator
Date registered: Jun 2007
Location: Portland, Oregon
Vehicle(s): 463.241, 461.213
Posts: 3004
| RE: "Please wait", no start?
Have you tried to read or clear codes on the car?
|
|
| |
|
Fred V
Regular
Date registered: Apr 2014
Location: Green Mnts
Vehicle(s): 02 G500
Posts: 88
| RE: "Please wait", no start?
Yes, had the car to a garage with the Mercedes software, no codes.
Also time or temp sensitive, left alone for a few hours or overnight will start normally.
If temp, any chance that might be related to the crankshaft position sensor?
Thank you. |
|
| |
|
Fred V
Regular
Date registered: Apr 2014
Location: Green Mnts
Vehicle(s): 02 G500
Posts: 88
| RE: "Please wait", no start?
Well, replacing crankshaft position sensor did nothing.
Off to the dealer, they "resynched" the keys, good for 7 days, same problem back again. Oddly the restraint system failure warning came on back when the vehicle was declining to start with the first key turn. That was also addressed by the dealer, supposedly was a bad connection but at the same time the no start recurred so did the restraint system failure warning. |
|
| |
|
Fred V
Regular
Date registered: Apr 2014
Location: Green Mnts
Vehicle(s): 02 G500
Posts: 88
| Re: "Please wait", no start?
Replacing the ignition switch seems to have fixed the no start trick. However, the dealership did not adequately tell the vehicle computer about the new ignition so when started I got a message on the screen "Anti-theft protection activated". No back up camera, radio, navigation, etc. Back to the dealership. |
|
| |
|
Fred V
Regular
Date registered: Apr 2014
Location: Green Mnts
Vehicle(s): 02 G500
Posts: 88
| RE: "Please wait", no start?
Replacing the ignition switch seems to have fixed the no start problem. However, when the dealership replaced the ignition switch they did not alert the vehicle computer so when I started it I got a message on the screen, "Anti-theft protection activated" No back up camera, navigation, radio etc. Back to the dealership. |
|
| |
