Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
dmcginn2 Regular Date registered: Apr 2007 Location: Vehicle(s): 2007 ML 320 CDI Posts: 61 | Trailer Brake Controller Has anyone installed a proportional trailer brake controller in their ML 320 CDI? I have the 5,000lb hitch with 7 pin plug on mine, and I read that the vehicle is pre-wired for a trailer brake controller. Does anyone know where they are before I go tearing panels apart? What does it look like, a plug or just the wire ends? I asked them to show me at the dealer while it was there for it's 6,500 mile tire rotation. To make a long story short, nobody "new". And they also told me at the parts counter that mercedes does not make/sell a controller. (My thoughts on that later). DjM | ||
#81910 | |||
Author |
| ||
dmcginn2 Regular Date registered: Apr 2007 Location: Vehicle(s): 2007 ML 320 CDI Posts: 61 | Re: Trailer Brake Controller I meant where the wires are, not the brake controller, in case that wasn't clear.... | ||
#81911 - in reply to #81910 | |||
« View previous thread :: View next thread » |
|
|