Welcome Guest. ( logon | register )   
FAQ Member List Albums Today's Posts Search

PointedThree :  Vans, Trucks, SUVs and Other Forums : G-Class : W460 Diff lock sleeve moved in rear axle

Page 1 of 1 1
W460 Diff lock sleeve moved in rear axle
Topic Tools Message Format
Author
Posted 9/9/2023 1:59 PM
Johann
Veteran




Date registered: May 2006
Location: Centurion, South Africa
Vehicle(s): 1999 LWB 290GDT 1981 SWB 240GD+ Cabrio 2015 G63
Posts: 259
100
W460 Diff lock sleeve moved in rear axle

Hi,

I was busy rebuilding the rear axle diff lock slave, and moved the G with the slave removed. Now the diff lock sleeve inside the axle has moved 😞
I tried jacking up both wheels and rotate them to get the diff lock pin hole visible again with no luck.

Any ideas how I fix this?

Thanks in advance.
Johann

Edited by Johann 9/9/2023 2:36 PM
#244005
Top of the page Bottom of the page
Author
Posted 10/3/2023 7:10 AM
Inkblotz
Expert




Date registered: Apr 2006
Location: Georgia
Vehicle(s): 90 300GD "Thundering Turtle II", w/ 603A turbo
Posts: 3186
2000
RE: W460 Diff lock sleeve moved in rear axle

Through the hole can you use a punch to gently tap rotate the slave til it comes around? Photo is for reference.

Edited by Inkblotz 10/3/2023 7:11 AM




(diff lock.png)



Attachments
----------------
Attachments diff lock.png (148KB - 13 downloads)
#244014 - in reply to #244005
Top of the page Bottom of the page
Author
Posted 10/5/2023 2:40 AM
Johann
Veteran




Date registered: May 2006
Location: Centurion, South Africa
Vehicle(s): 1999 LWB 290GDT 1981 SWB 240GD+ Cabrio 2015 G63
Posts: 259
100
Re: W460 Diff lock sleeve moved in rear axle

Thank you!!!
That worked.
I used the sharp point of a flat screwdriver to rotate it.

#244017 - in reply to #244014
Top of the page Bottom of the page
Author
Posted 10/5/2023 6:45 AM
Inkblotz
Expert




Date registered: Apr 2006
Location: Georgia
Vehicle(s): 90 300GD "Thundering Turtle II", w/ 603A turbo
Posts: 3186
2000
Re: W460 Diff lock sleeve moved in rear axle

Glad it worked out.
#244020 - in reply to #244005
Top of the page Bottom of the page
« View previous thread :: View next thread »
Page 1 of 1 1
Forum Jump :
All times are EST.  The time is now 7:49:09 PM.

Execution: 0.218 seconds, 93 cached, 11 executed.