Welcome Guest. ( logon | register )   
FAQ Member List Albums Today's Posts Search

PointedThree :  Vans, Trucks, SUVs and Other Forums : G-Class : Finally My PUCH looks corect

Page 2 of 2 12
Finally My PUCH looks corect
Topic Tools Message Format
Author
Posted 10/9/2006 9:08 AM
EuroTruck
Extreme Veteran


Date registered: Apr 2006
Location: Oakwood, Georgia - USA
Vehicle(s): 2012 Audi A4 Avant S-Line, 2015 Ridley NOAH SL
Posts: 518
500
RE: Finally My PUCH looks corect

frank_be - 10/9/2006 5:46 AM

Can someone tell me what the correct partnumber is for this Logo (463 type)?

I have a number here which I think should be correct, but I can't confirm: A 463 888 01 16

 

 

Frank,

That is a good part number.

Cheers,

 

-Sean

#47886 - in reply to #47879
Top of the page Bottom of the page
Author
Posted 10/9/2006 9:20 AM
KERR

Date registered: Dec 1899
Location:
Vehicle(s):
Re: Finally My PUCH looks corect

Looks good. I had all the puch emblems on mine as well for some time.

Where do you all find those tire, there is a guy in town running them on a big dodge i think... anyway i looked on line for a normal size and could not find any. From what everyone says they are grate tires.
#47887 - in reply to #38231
Top of the page Bottom of the page
Author
Posted 10/9/2006 9:58 AM
frank_be
Veteran


Date registered: Apr 2006
Location: Belgium
Vehicle(s): G350 Turbo
Posts: 148
100
Re: Finally My PUCH looks corect

230G - 10/8/2006 2:49 PM Frank, Sean at Eurotruck can and I believe he still has one

 Thanks for the info, but Sean is in the US and gets his stuff from Europe, and I'm already in Europe...

So a partnumber would be more helpfull. But thanks anyway! :cheers:   I will contact Sean and see if he can help me anyway.

 

Greetings,

Frank

#47890 - in reply to #47882
Top of the page Bottom of the page
Author
Posted 10/9/2006 10:09 AM
frank_be
Veteran


Date registered: Apr 2006
Location: Belgium
Vehicle(s): G350 Turbo
Posts: 148
100
Re: Finally My PUCH looks corect

Ooops,

Your answers were quicker than mine...

Greetings,

Frank

#47893 - in reply to #47890
Top of the page Bottom of the page
Author
Posted 10/11/2006 5:46 AM
frank_be
Veteran


Date registered: Apr 2006
Location: Belgium
Vehicle(s): G350 Turbo
Posts: 148
100
RE: Finally My PUCH looks corect

I ordered the part yesterday and today I got a reply that this part is no longer available...

So now I wil lasercut one in stainless steel. It wil do the same.

I will post the final result when it's finished.

 

Greetings,

Frank



Edited by frank_be 10/11/2006 5:48 AM




(Puch.jpg)



Attachments
----------------
Attachments Puch.jpg (225KB - 7 downloads)
#48136 - in reply to #47886
Top of the page Bottom of the page
Author
Posted 10/11/2006 10:18 AM
G350DT

Date registered: Dec 1899
Location:
Vehicle(s):
Re: Finally My PUCH looks corect

I have asked 3 places about doing this for me and I get the same responce
Richard,
I'm afraid we could not take this job.
There are trademark infringement issues that we would not want to deal with.
Thanks for the inquiry.
Karla
#48156 - in reply to #38231
Top of the page Bottom of the page
Author
Posted 10/11/2006 10:31 AM
DUTCH
Administrator Doppelgänger




Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9963
5000
Puch Emblem

230G - 10/11/2006 10:18 AM

I have asked 3 places about doing this for me and I get the same responce
Richard,
I'm afraid we could not take this job.
There are trademark infringement issues that we would not want to deal with.
Thanks for the inquiry.
Karla


Have you tried these folks?

http://www.autoquariat.at/

or

http://www.tschiewagon.com/

This last one can be very slow to ship after taking your money, so be careful.
#48158 - in reply to #48156
Top of the page Bottom of the page
Author
Posted 10/11/2006 11:22 AM
G350DT

Date registered: Dec 1899
Location:
Vehicle(s):
Re: Finally My PUCH looks corect

I have talked with both and neither has the correct one
#48164 - in reply to #38231
Top of the page Bottom of the page
« View previous thread :: View next thread »
Page 2 of 2 12
Forum Jump :
All times are EST.  The time is now 7:51:19 PM.

Execution: 0.281 seconds, 93 cached, 12 executed.