|
86230GE
Date registered: Dec 1899
Location:
Vehicle(s):
| COLD START INJECTOR (& GASKET)
My mechanic checked out my cold start injector today in my 230GE and found it to be faulty. I phoned the local MB dealer here in Newmarket and they quoted my $420 CDN (~ $370 US) for the cold start injector & some small amount (less than $10 CDN) for the gasket for it.
Are there any G-wagon suppliers that you know that I could contact to see if their prices are better? I would also like to find out about some other part prices as well.
Thanks in advance  ,
Matt |
|
| |
|
Ernest T Bass
Date registered: Dec 1899
Location:
Vehicle(s):
| Re: COLD START INJECTOR (& GASKET)
You could try Benzbin.com or something like it I am sure the cold start valve is the same or similar to the 2.3 190MB they want 180US |
|
| |
|
EuroTruck
Extreme Veteran
Date registered: Apr 2006
Location: Oakwood, Georgia - USA
Vehicle(s): 2012 Audi A4 Avant S-Line, 2015 Ridley NOAH SL
Posts: 518
| RE: COLD START INJECTOR (& GASKET)
Matt, What is your VIN? I'll need it to find the part number for the cold start valve, that is unless you already know the part number. Thanks, -Sean Philyaw |
|
| |
|
Inkblotz
Expert
Date registered: Apr 2006
Location: Georgia
Vehicle(s): 90 300GD "Thundering Turtle II", w/ 603A turbo
Posts: 3186
| Re: COLD START INJECTOR (& GASKET)
http://oem.thepartsbin.com/parts/thepartsbin/wizard.jsp?year=1987&m... |
|
| |
|
EuroTruck
Extreme Veteran
Date registered: Apr 2006
Location: Oakwood, Georgia - USA
Vehicle(s): 2012 Audi A4 Avant S-Line, 2015 Ridley NOAH SL
Posts: 518
| Re: COLD START INJECTOR (& GASKET)
Hi Matt, We can offer an OEM Bosch part for $169 US. Of course I am biased, but I think it's better to support G-Class enthuasiast parts dealers, especially when we offer these parts at competive prices.
Thanks, -Sean Philyaw http://www.eurotruck-importers.com |
|
| |
|
Inkblotz
Expert
Date registered: Apr 2006
Location: Georgia
Vehicle(s): 90 300GD "Thundering Turtle II", w/ 603A turbo
Posts: 3186
| Re: COLD START INJECTOR (& GASKET)
Matt
Seans part will be spot on as to what you need. I do not know for sure if the listing if for the exact engine as yours. Being a USA model sedan there may be some differences.
Mark |
|
| |
|
Ernest T Bass
Date registered: Dec 1899
Location:
Vehicle(s):
| Re: COLD START INJECTOR (& GASKET)
EuroTruck - 11/17/2006 9:50 AM
Hi Matt, We can offer an OEM Bosch part for $169 US. Of course I am biased, but I think it's better to support G-Class enthuasiast parts dealers, especially when we offer these parts at competive prices.
Thanks, -Sean Philyaw http://www.eurotruck-importers.com
I would agree with Sean - I only suggested the other place as I bought stuff for my 124 from them and they have a online parts lookup which helps give an idea of part compatibility and price etc. |
|
| |
