Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
petermerle Expert Date registered: Apr 2006 Location: Cape Town ( deep south ) Vehicle(s): W460 *1, W123 *2, W124 Posts: 1315 | desperately need body mount part no EPC is very confusing on this item - lower body mount for early G VIN 46033227023247. It appears that the item is Item #5 on the EPC part no A4603170212 however this part is listed as no available on www.mbparts.ru. Has anyone purchased this item before - see picture. Note item #3 is what it should be but EPC this is not valid for my VIN. (Bottom Bodymount.jpg) Attachments ---------------- Bottom Bodymount.jpg (102KB - 10 downloads) | ||
#53877 | |||
Author |
| ||
hipine Date registered: Jul 2006 Location: US, CO, Bailey Vehicle(s): 460 1980 280GE w. 617A | RE: desperately need body mount part no EPC also lists 460.317.01.12 for item #5 on chassis #s up to 27800, and then lists that same # for chassis over 27800. My guess from all this is that the lower rubber of all body mounts have been superseeded by the 01.12 number. Try that one. -Dave G. Edited by hipine 11/21/2006 1:18 PM | ||
#53881 - in reply to #53877 | |||
Author |
| ||
petermerle Expert Date registered: Apr 2006 Location: Cape Town ( deep south ) Vehicle(s): W460 *1, W123 *2, W124 Posts: 1315 | RE: desperately need body mount part no I have actually just purchased 4603170112 and it is in fact the upper mount ! See pict (A4603170112.jpg) Attachments ---------------- A4603170112.jpg (175KB - 6 downloads) | ||
#53887 - in reply to #53881 | |||
Author |
| ||
hipine Date registered: Jul 2006 Location: US, CO, Bailey Vehicle(s): 460 1980 280GE w. 617A | maybe a dumb question but..... Does that one you bought FIT in place as the lower rubber? If it does, then I think it's a darned fine idea of them to lower cost and parts proliferation by consolidating to a single part number for both rubbers. The lower one has a relatively easy life and almost anything would work there. So I say if it fits, then use it. -Dave G. | ||
#54005 - in reply to #53887 | |||
Author |
| ||
petermerle Expert Date registered: Apr 2006 Location: Cape Town ( deep south ) Vehicle(s): W460 *1, W123 *2, W124 Posts: 1315 | RE: maybe a dumb question but..... I don't think it does. ( BTW the vehicle is some 1500 km away at a friend who is respaying/derusting the vehicle ) PEter | ||
#54016 - in reply to #54005 | |||
Author |
| ||
EuroTruck Extreme Veteran Date registered: Apr 2006 Location: Oakwood, Georgia - USA Vehicle(s): 2012 Audi A4 Avant S-Line, 2015 Ridley NOAH SL Posts: 518 | RE: desperately need body mount part no Hi Peter, The new part number is A 461 317 0012. Sorry for the delay. Our guys in Germany were away from the office yesterday due to a day off there. Have fun, -Sean Philyaw | ||
#54081 - in reply to #53877 | |||
Author |
| ||
petermerle Expert Date registered: Apr 2006 Location: Cape Town ( deep south ) Vehicle(s): W460 *1, W123 *2, W124 Posts: 1315 | Re: desperately need body mount part no Thanks Sean PEter BTW whats even more confusing are the washers ! According to the diagram I only have items 16 and 14 . What is actually there is item 29,26 and 14. Becaus eof all this confusion I am going to have washers made to avoid any furthur delays in getting my G back on the road. PEter | ||
#54102 - in reply to #53877 | |||
« View previous thread :: View next thread » |
|
|