Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
imjustdave Regular Date registered: Feb 2012 Location: Bonney Lake Washington USA Vehicle(s): 2004 G500, 2014 Audi Q7 TDI, 2006 Ram 3500. Posts: 77 | G500 Transmission cooler hose end size. - in bumper I'm in the process of relocating the transmission cooler on a G500 that is in the bumper but the relocation brackets are on order but delayed. I'm trying to go on a trip and the cooler is basically dangling I have 2 option. 1 Zip tie it up, unsure how well zip ties will do with the temp and vibration is always an issue and potential damage. 2 Seeing as max outside temp should be about 80 worse case, no towing, maybe some wheeling I was thinking of just removing the cooler for my weekend trip. But unsure of the hose end sizes, would be easier to have the size to get a union to bridge the gap. Anyone know the input and output size of the cooler? Thoughts ideas? If Im reading EPC correct it should be these parts. A4635001400 Radiator A4632701496 passenger side hose A4632701496 Drivers side hose 2004 G500 Edited by imjustdave 6/14/2018 4:17 PM | ||
#239397 | |||
Author |
| ||
DUTCH Administrator Doppelgänger Date registered: Apr 2006 Location: US, GA, Atlanta Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter Posts: 9963 | RE: G500 Transmission cooler hose end size. - in bumper Personally, if it were me, I'd cushion it with some rigid closed cell foam and use some HD zip ties to secure it; rather than opening up the transmission lines more times than is absolutely necessary. | ||
#239401 - in reply to #239397 | |||
Author |
| ||
NHDave Extreme Veteran Date registered: Dec 2013 Location: Seacoast NH. Vehicle(s): 2004 AMG Posts: 465 | Re: G500 Transmission cooler hose end size. - in bumper Can't you simply put it back where it was for the time being. I must be missing some understanding about relocating the cooler? Enjoy your trip! | ||
#239402 - in reply to #239397 | |||
Author |
| ||
imjustdave Regular Date registered: Feb 2012 Location: Bonney Lake Washington USA Vehicle(s): 2004 G500, 2014 Audi Q7 TDI, 2006 Ram 3500. Posts: 77 | Re: G500 Transmission cooler hose end size. - in bumper In the end I just used some wood and soft shipping padding and zip ties to contain it in 1 spot didn't have any issues on the trip. Parts arrived should be installing the cooler in its new home this week. NHDave I removed the factory bumper which normally houses or holds the transmission cooler, my aftermarket bumper isn't' setup to hold the cooler. On the G55 this cooler is normally under the G more and actually on top of the skid pan, this is the mounting bracket I was waiting for in the mail. | ||
#239427 - in reply to #239397 | |||
« View previous thread :: View next thread » |
|
|