Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
stubear334 Veteran Date registered: Aug 2009 Location: Montgomery, AL, USA Vehicle(s): 1980 280GE, BMW 318Ti, Infiniti JX35 Posts: 169 | M110 Alternator Belt Size? Does anyone know what size belt for a 280GE alternator/water pump? Mine broke on the way home Will an Autozone in the States have such a beast??? What are the chances the engine is shot??? I drove the car 5 miles before noticing! Stuart | ||
#172610 | |||
Author |
| ||
ontum Veteran Date registered: Nov 2009 Location: Portland, OR Vehicle(s): 1979 300GDT Cabrio, 1994 W124 603 Posts: 131 | Re: M110 Alternator Belt Size? You drove 5 miles with your red battery light on without noticing? Yes AutoZone would have belts but they might not be metric sizes and be a few millimeters off, which is fine because you have some room to adjust. What was your water temp showing when you realized you lost a belt? - Craig | ||
#172611 - in reply to #172610 | |||
Author |
| ||
stubear334 Veteran Date registered: Aug 2009 Location: Montgomery, AL, USA Vehicle(s): 1980 280GE, BMW 318Ti, Infiniti JX35 Posts: 169 | RE: M110 Alternator Belt Size? I didn't see the darn light in the bright sunlight. Only time will tell if it did any damage! | ||
#172612 - in reply to #172610 | |||
Author |
| ||
DesertStar Expert Date registered: Apr 2006 Location: San Diego, CA USA Vehicle(s): 85-280GE/95-G320/08-G500 Posts: 2156 | RE: M110 Alternator Belt Size? Here you go... (belt info [800x600].JPG) Attachments ---------------- belt info [800x600].JPG (101KB - 8 downloads) | ||
#172636 - in reply to #172610 | |||
Author |
| ||
stubear334 Veteran Date registered: Aug 2009 Location: Montgomery, AL, USA Vehicle(s): 1980 280GE, BMW 318Ti, Infiniti JX35 Posts: 169 | RE: M110 Alternator Belt Size? Turns out the head gasket blew. The car leaked coolant steadily a day later parked in the garage & blew white smoke as I loaded onto the flat bed tow truck. Anyways, what brand head gasket do y'all recommend? On my MGBs I used felpro with the silicone rings around the passages. Stuart | ||
#172998 - in reply to #172610 | |||
Author |
| ||
hipine Date registered: Jul 2006 Location: US, CO, Bailey Vehicle(s): 460 1980 280GE w. 617A | RE: M110 Alternator Belt Size? You can just ask for the alternator belt for a '79 280SE. That's what I did when mine broke some years ago. I was walking distance from a tiny town that had a mom-and-pop garage, and the guy had one, so the size must be common enough. -Dave G. PS - Hmmm.... check that.....I can't guarantee that I asked for the belt that way. I noticed my alt light right away and stopped within a quarter mile of where it came on, so I may have been able to find the old belt and use that to get the replacement. I think I posted on BWF when it happened. I see good info above from Mike to help in this case though. Edited by hipine 6/3/2010 11:42 AM | ||
#172999 - in reply to #172610 | |||
Author |
| ||
hipine Date registered: Jul 2006 Location: US, CO, Bailey Vehicle(s): 460 1980 280GE w. 617A | RE: MB head gasket I've used only the Victor Reinz [sp?] ones in the MB diesels I've rebuilt (much tougher life than a gasser's HG). Working great so far with about 50k miles on one motor and 15k on the other. It was the part a trusted indie MB mechanic with a big, satisfied return-customer base sold me, so that's the one I used. -Dave G. | ||
#173000 - in reply to #172998 | |||
Author |
| ||
G-AMG G-Class DIY Host Date registered: May 2006 Location: South Texas Vehicle(s): '04 G55, '80 280GE, '99 S420, '98 E320, 2011 E350 | RE: M110 Alternator Belt Size? Going to the new "DIY" section, I ran across my old post: http://www.pointedthree.com/disc/forums/showthread.php?tid=12811&po... It looks like the brand my dealer supplied me was--> CONTI-SF AV10 X 960 La, as the M110 has a Alternator Belt- 10mm by 960mm Suprisingly, the other TWO belts I got in a MB box were OPTIBELT(a German brand) , and GATES (a USA made you can get at any Auto-Zone type place). | ||
#173027 - in reply to #172610 | |||
« View previous thread :: View next thread » |
|
|