Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
spots350sl Veteran Date registered: Mar 2007 Location: Chicago, Illinois Vehicle(s): 2003 G500, 1972 350SL Posts: 222 | Wiper Motor Diagram/Replacement Hello all! Recently I noticed a clunking sound when the wipers are used. Upon investigation, I discovered that the wiper motor was loose and it appears that one of the three bolts has fallen out. From looking at the part online, it appears that the motor is bolted from the inside. I've read that others have replaced the motor without removing the dash, but can't find how it was done. How do I go about tightening/replacing the bolt? Can I access it by removing the command unit? Thanks in advance! | ||
#191126 | |||
Author |
| ||
4x4abc Date registered: Apr 2006 Location: La Paz, Baja California, Mexico Vehicle(s): 02 G500 | RE: Wiper Motor Diagram/Replacement dash has to come out http://rubicon-trail.com/public/disassemble/ | ||
#191127 - in reply to #191126 | |||
Author |
| ||
spots350sl Veteran Date registered: Mar 2007 Location: Chicago, Illinois Vehicle(s): 2003 G500, 1972 350SL Posts: 222 | RE: Wiper Motor Diagram/Replacement I knew that was the only solution for the linkage, was hoping there was an easier way to fix/replace the wiper motor. Oh well... Thanks | ||
#191130 - in reply to #191127 | |||
Author |
| ||
Sassen Regular Date registered: Jan 2009 Location: Omaha, NE Vehicle(s): 18 4×4², 18 Sprinter 4x4, 16 MB Serenity, 04 G500 Posts: 55 | RE: Wiper Motor Diagram/Replacement Please note that the motor is actually mounted from the engine bay, I recently had the same problem, my three screws that hold the wiper motor to a plate were loose, there are 3 bolts that hold the wiper motor to the "frame", once these are removed, it is a tight fit, use a mirror and you can get a number 10 to tighten the bolts. Oh was I soo happy I didn't have to remove the dash. The motor is hidden behind the hood sensor and hydraulics for the diff lockers. And small hands would work best here lol | ||
#214230 - in reply to #191126 | |||
Author |
| ||
Amnaggar Veteran Date registered: May 2013 Location: Dubai Vehicle(s): '10 G55, '10 C250, '05 Volvo S40 T5, '05 Pajero Posts: 100 | Re: Wiper Motor Diagram/Replacement Related question: what would make a wiper go prrrrrrr on its way back?! Only that it's dry? We don't exactly get lots of rain in Dubai to keep the rubber soft... | ||
#214232 - in reply to #191126 | |||
Author |
| ||
roughneck Expert Date registered: Apr 2006 Location: UK, Germany & USA Vehicle(s): 270 cdi.300 GD 300 GE.lwb 300 GE.swb. Disco 2 Posts: 4398 | Re: Wiper Motor Diagram/Replacement Replacement. http://seekpart24.com/bosch/wiper-motor-390246137?c=100134&at=8555 | ||
#214234 - in reply to #214232 | |||
Author |
| ||
Sassen Regular Date registered: Jan 2009 Location: Omaha, NE Vehicle(s): 18 4×4², 18 Sprinter 4x4, 16 MB Serenity, 04 G500 Posts: 55 | Re: Wiper Motor Diagram/Replacement with the blades lifted off the windscreen, does it make the same noise? If not try changing out your blades to another brand? More plausible is that the are stiffened by your heat? I get the same problem in summer and then it rains. | ||
#214252 - in reply to #214232 | |||
Author |
| ||
Amnaggar Veteran Date registered: May 2013 Location: Dubai Vehicle(s): '10 G55, '10 C250, '05 Volvo S40 T5, '05 Pajero Posts: 100 | Re: Wiper Motor Diagram/Replacement Sassen - 5/29/2013 1:01 AM with the blades lifted off the windscreen, does it make the same noise? If not try changing out your blades to another brand? More plausible is that the are stiffened by your heat? I get the same problem in summer and then it rains. Thx. Yeah, from experience here I'm guessing it's the heat! And yet another summer has just kicked in! Hell on earth over here! The yearly reminder to stop sinning | ||
#214265 - in reply to #214252 | |||
Author |
| ||
atg Veteran Date registered: Nov 2014 Location: Los Angeles Vehicle(s): 2005 G55, 1985 300tdt Posts: 129 | Re: Wiper Motor Diagram/Replacement Ok so is this the clunking sound you were hearing? https://www.dropbox.com/s/gyv6dacgvzgzs1e/20141130_153438.mp4?dl=0 | ||
#225498 - in reply to #191126 | |||
Author |
| ||
atg Veteran Date registered: Nov 2014 Location: Los Angeles Vehicle(s): 2005 G55, 1985 300tdt Posts: 129 | Re: Wiper Motor Diagram/Replacement Ok can anyone comment on the wiper sound in the video link above? My thought is motor bolts but if I can check the linkage more easily I will. Thanks. | ||
#225548 - in reply to #225498 | |||
Author |
| ||
4x4Cal Veteran Date registered: May 2007 Location: Calgary, Canada Vehicle(s): a Desert Silver & a Brilliant Silver G500 Posts: 260 | Re: Wiper Motor Diagram/Replacement atg - 12/3/2014 11:13 AM Ok can anyone comment on the wiper sound in the video link above? My thought is motor bolts but if I can check the linkage more easily I will. Thanks. I think I heard the noise from the wiper blades. Do you have another set of wiper blades to test? lets try if you hear the same sounds when you lift the arms off the windshield then turn the wipers on. | ||
#225558 - in reply to #225548 | |||
Author |
| ||
atg Veteran Date registered: Nov 2014 Location: Los Angeles Vehicle(s): 2005 G55, 1985 300tdt Posts: 129 | RE: Wiper Motor Diagram/Replacement OK I just changed the blades but they could be clunking around a bit. To me it sounds like it is in the firewall somewhere high up but one could not tell that from the video. Will try your suggestion and report back. Thanks, Karl | ||
#225563 - in reply to #191126 | |||
Author |
| ||
atg Veteran Date registered: Nov 2014 Location: Los Angeles Vehicle(s): 2005 G55, 1985 300tdt Posts: 129 | Re: Wiper Motor Diagram/Replacement Nope its not the blades. Play somewhere in the linkage or motor. https://www.dropbox.com/s/d6ggmym2o1n870v/20141206_120414.mp4?dl=0 | ||
#225603 - in reply to #225563 | |||
Author |
| ||
atg Veteran Date registered: Nov 2014 Location: Los Angeles Vehicle(s): 2005 G55, 1985 300tdt Posts: 129 | Re: Wiper Motor Diagram/Replacement I took the footwell apart and crawled under there then switched the wipers on. The sound was coming from the mounting flange of the driver's side wiper, which was moving back and forth with each wiper stroke. The mounting bolts had come loose for some reason. I was able to retorque them with a u-joint on a 14" extension on a 1/4" ratchet; the bolt heads are 10mm as someone conveniently mentioned above. I say conveniently because the bolt heads are almost impossible to reach being directly above the steering column and brackets for the dashboard, so even getting a socket up there is a challenge. Anyway, no more clunking sound. The wiper blades still make the usual noise when they change direction on the glass of course, but no clunk from the firewall and no more play in the wipers when I move them by hand. I don't know why they would come loose but maybe the car saw lots of washboards or something in another life. It only has 50k on it; everything looks brand new under there. | ||
#225607 - in reply to #225603 | |||
Author |
| ||
atg Veteran Date registered: Nov 2014 Location: Los Angeles Vehicle(s): 2005 G55, 1985 300tdt Posts: 129 | RE: Wiper Motor Diagram/Replacement Photo of flange bolts on drivers wiper arm from footwell. EDIT: Photo removed to be resized. | ||
#225657 - in reply to #191126 | |||
Author |
| ||
Gurukid Member Date registered: Jul 2013 Location: Sarasota, Florida Vehicle(s): 2003 G500 Posts: 21 | Re: Wiper Motor Diagram/Replacement Lovely, this is on my list of things to do in the next few days... Can't wait.... | ||
#225658 - in reply to #191126 | |||
Author |
| ||
512bbi Expert Date registered: Jan 2007 Location: North western US and Europe Vehicle(s): 05G55kge,Range rover classic,clk55amg,ML 430 Posts: 1313 | RE: Wiper Motor Diagram/Replacement atg - 12/9/2014 9:22 PM Photo of flange bolts on drivers wiper arm from footwell. EDIT: Photo removed to be resized. I wish I could see that photo. Mario | ||
#225695 - in reply to #225657 | |||
Author |
| ||
atg Veteran Date registered: Nov 2014 Location: Los Angeles Vehicle(s): 2005 G55, 1985 300tdt Posts: 129 | Re: Wiper Motor Diagram/Replacement I didnt remove it. Try this link: https://www.dropbox.com/s/z4kpftieiazi8qj/20141206_133124.jpg?dl=0 Edited by atg 12/13/2014 10:44 AM | ||
#225697 - in reply to #191126 | |||
Author |
| ||
thebigblue Date registered: Jan 2012 Location: Vehicle(s): | Re: Wiper Motor Diagram/Replacement atg - 12/13/2014 4:39 PM I didnt remove it. Try this link: https://www.dropbox.com/s/z4kpftieiazi8qj/20141206_133124.jpg?dl=0 If a photo is wider than something around 900 to 1000 px, DUTCH will remove it at sight. Edited by thebigblue 12/14/2014 5:02 AM | ||
#225714 - in reply to #225697 | |||
Author |
| ||
DUTCH Administrator Doppelgänger Date registered: Apr 2006 Location: US, GA, Atlanta Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter Posts: 9963 | Re: Wiper Motor Diagram/Replacement thebigblue - 12/14/2014 5:01 AM If a photo is wider than something around 900 to 1000 px, DUTCH will remove it at sight. And it's done with a simple request and fair warning. See here: http://pointedthree.com/disc/forums/showthread.php?tid=18494&mid=19... | ||
#225716 - in reply to #225714 | |||
« View previous thread :: View next thread » |
|
|