|
Inkblotz
Expert
Date registered: Apr 2006
Location: Georgia
Vehicle(s): 90 300GD "Thundering Turtle II", w/ 603A turbo
Posts: 3185
| Re: How to Remove the ABS Connector on the Front Hub?
With your garage queen I doubt you will have any difficulty removing it. |
|
| |
|
gbenzer
Extreme Veteran
Date registered: Dec 2006
Location: Georgia
Vehicle(s): 2007 G-500, 2017 Audi Q7
Posts: 418
| Re: How to Remove the ABS Connector on the Front Hub?
Inkblotz - 2/11/2012 9:50 AM
With your garage queen I doubt you will have any difficulty removing it.
Ouch! |
|
| |
|
DUTCH
Administrator Doppelgänger
Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9963
| Re: How to Remove the ABS Connector on the Front Hub?
Inkblotz - 2/11/2012 9:50 AM
With your garage queen I doubt you will have any difficulty removing it.
I resemble that remark.  |
|
| |
|
roughneck
Expert
Date registered: Apr 2006
Location: UK, Germany & USA
Vehicle(s): 270 cdi.300 GD 300 GE.lwb 300 GE.swb. Disco 2
Posts: 4398
| Re: How to Remove the ABS Connector on the Front Hub?
DUTCH - 2/11/2012 2:43 PM
Inkblotz - 2/11/2012 9:36 AM
If you are concerned that it may get damaged simply pull it out of the hub and tie it out of the way. You don't need to remove it from the vehicle
Thanks. That assumes, of course, that it can be pulled out without damage. :raiseeyebrows:
A liberal soke with a good easing oil or kerosene, then tighten the fastner 1/4 turn to "crack" the thread before loosening generaly does the trick for me.
Give the component a good waggle and they ussualy pop out easy.
Edited by roughneck 2/12/2012 6:09 AM
|
|
| |
|
SMP2010
Member
Date registered: Feb 2014
Location: Southern California-Temecula
Vehicle(s): 2002 G500
Posts: 14
| Re: How to Remove the ABS Connector on the Front Hub?
Does anyone what is the torque spec for reattaching this little hex bolt that holds the ABS sensor to the hub? Thank you! |
|
| |
|
AlanMcR
Expert
Date registered: Apr 2006
Location: US, CA, Los Altos
Vehicle(s): G300DT E300DT 230SL
Posts: 3500
| Re: How to Remove the ABS Connector on the Front Hub?
I'd assume somewhere in the range of 3 to 5 Nm.
|
|
| |
|
DUTCH
Administrator Doppelgänger
Date registered: Apr 2006
Location: US, GA, Atlanta
Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter
Posts: 9963
| Re: How to Remove the ABS Connector on the Front Hub?
AlanMcR - 4/14/2014 1:26 PM
I'd assume somewhere in the range of 3 to 5 Nm.
Close. It's 8 Nm. |
|
| |
