Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
Ertech Veteran Date registered: May 2016 Location: Montreal CA Vehicle(s): 2011 G550 Posts: 156 | left heat problem??a/c ok Hi guys this car has been neglected by the past owner and slowly bringing it back to life thanks to you guys.this is my latest problem. A/c works on both side,left and right. but when I turn the heat on only the right side works and no air is coming form the left .what flap motor is responsible for letting hot air to the left vents? thanks. Erick | ||
#234163 | |||
Author |
| ||
thebigblue Date registered: Jan 2012 Location: Vehicle(s): | Re: left heat problem??a/c ok If you do a search for "flap" and "vent" several hits will emerge, i.e. this: http://www.pointedthree.com/disc/forums/showthread.php?tid=20805&po... | ||
#234165 - in reply to #234163 | |||
Author |
| ||
Ertech Veteran Date registered: May 2016 Location: Montreal CA Vehicle(s): 2011 G550 Posts: 156 | Re: left heat problem??a/c ok I have read most of them Is there a particular one that sends the heat to the left and does the new motor come with the arm? Thanks | ||
#234168 - in reply to #234165 | |||
Author |
| ||
thebigblue Date registered: Jan 2012 Location: Vehicle(s): | Re: left heat problem??a/c ok Not sure, this one maybe: Edited by thebigblue 10/15/2016 7:52 AM | ||
#234169 - in reply to #234163 | |||
Author |
| ||
Ertech Veteran Date registered: May 2016 Location: Montreal CA Vehicle(s): 2011 G550 Posts: 156 | Re: left heat problem??a/c ok perfect will replace it is there a white plastic arm to replace at the same time? if so can't find the part number thanks | ||
#234174 - in reply to #234169 | |||
Author |
| ||
BlueG Elite Veteran Date registered: Aug 2009 Location: DC Vehicle(s): 2003 G500 Posts: 714 | Re: left heat problem??a/c ok Yes replace the white plastic arm too. If you are at the dealer they can pull it up via the VIN. I was able to see which one wasn't working when I had the radio out. Its all rather easy once you determine how you want to snake your hand/tools in there. | ||
#234178 - in reply to #234163 | |||
« View previous thread :: View next thread » |
|
|