| FAQ | Member List | Albums | Today's Posts | Search  |
| Welcome Guest. ( logon | register ) | |||||
| ||||||
|
| Topic Tools | Message Format |
| ||
| RSF.Gunney Regular Date registered: Nov 2016 Location: Qatar Vehicle(s): W460 - 280ge Posts: 63  | RE: Introduction w460 Resurrection in Qatar Can I run the fuel filter before the Accumulator? It would make it much easier for me as I can then follow this setup, I'm a little unsure based on the WS diagram I have found. As far as I can work out the correct fuel flow setup is as follows: - Fuel pump to back of filter - Front of filter to outside fitting on accumulator - Center fitting on accumulator to fuel distributor - Small return line from back of accumulator back to fuel tank (002.png) (010.png) (012.png) Attachments ----------------  002.png (571KB - 1 downloads) 010.png (401KB - 0 downloads) 012.png (564KB - 0 downloads) | |
| ||
| ||
| Otiswesty Administrator Date registered: Jun 2007 Location: Portland, Oregon Vehicle(s): 463.241, 461.213 Posts: 3004  | ||
| ||
| ||
| Doug Nel Veteran Date registered: May 2006 Location: Cape Town, South Africa Vehicle(s): 1982 280GE 5 door automatic Posts: 258  | ||
| ||
| ||
| DUTCH Administrator Doppelgänger Date registered: Apr 2006 Location: US, GA, Atlanta Vehicle(s): 2015 Audi Q7 3.0 TDI,2018 Sprinter Posts: 9963  | ||
| ||
| ||
| Otiswesty Administrator Date registered: Jun 2007 Location: Portland, Oregon Vehicle(s): 463.241, 461.213 Posts: 3004 | ||
| ||
|
