Welcome Guest. ( logon | register ) | ||||||
|
|
|
| Topic Tools | Message Format |
Author |
| ||
Otiswesty Administrator Date registered: Jun 2007 Location: Portland, Oregon Vehicle(s): 463.241, 461.213 Posts: 3006 | Canadian army taillights on a 463 So I have a set of Canadian army Gwagen tail lights that are a very nice robust light housing. I have been thinking about adding them to my G500. A couple of years ago I swapped the rear bumper for 461 series Dutch army bumperettes and the larger reverse lights used on Unimogs and some military G wagens. The tail lights can be added to a 460 with only small modifications to the opening. The 463 opening is a little different, but still very close in size. I have ordered some laser cut adaptor plates that should be here in a week or so. These should cover the 463 hole with a cut out for the army version. All reversible if desired. (DutchBumper.jpg) (Comparison.jpg) (RearLights.jpg) (Curvature2.jpg) (Shortened.jpg) (Adaptor.jpg) Attachments ---------------- DutchBumper.jpg (63KB - 0 downloads) Comparison.jpg (59KB - 0 downloads) RearLights.jpg (131KB - 0 downloads) Curvature2.jpg (105KB - 0 downloads) Shortened.jpg (55KB - 0 downloads) Adaptor.jpg (20KB - 0 downloads) | ||
#243940 | |||
Author |
| ||
Otiswesty Administrator Date registered: Jun 2007 Location: Portland, Oregon Vehicle(s): 463.241, 461.213 Posts: 3006 | RE: Canadian army taillights on a 463 I received my proof of concept adaptor plates today. Excited to get them tested. More info to follow. (IMG_20230606_221431417_copy_800x600.jpg) Attachments ---------------- IMG_20230606_221431417_copy_800x600.jpg (129KB - 1 downloads) | ||
#243943 - in reply to #243940 | |||
« View previous thread :: View next thread » |
|
|